Resurfacing
Below is the general description of the procedures involved with resurfacing a driveway. Please note that all driveways are different and may require different resurfacing techniques. Therefore, only a signed contract from A Finer Surface, LLC, will describe how an individual driveway will be resurfaced and provide a guarantee of work.
Below is a general description of the procedures involved with the removal of an existing driveway and its subsequent replacement. Please note that all driveways are different and may require different removal and replacement methonds. Therefore, only a signed contract from A Finer Surface, LLC, will describe how an individual driveway will be completed and provide a guarantee of work. Below is a general description of the procedures involved with the construction of a new driveway. Please note that ground surfaces vary considerably and may require installation procedures not described below. Therefore, only a signed contract from Below is a general description of the procedures involved when additions are made to a preexisting driveway. Please note that each driveway and surface area varies considerably and may require different installation methods. Therefore, only a signed contract from A Finer Surface, LLC, will describe how an individual driveway will be resurfaced and provide a guarantee of work. 
Clean and edge driveway.
Remove area of asphalt by garage to promote positive water drainage.
Remove broken areas and replace with full depth hot asphalt. Compact.
Level low areas with hot asphalt and compact.
Apply a primer binder to bond new asphalt with existing.
Machine lay 2.5 inches (2" compacted) of surface fine asphalt to driveway.
Compact with a vibratory roller.
Hand tamp edges on a 45-degree angle for a neat appearance.
Replacement of Existing Driveway
Dig out existing asphalt or concrete driveway.
Haul debris from site.
Grade and compact soil.
Machine lay 3 inches (2.5" compacted) of base asphalt to the area.
Compact.
Machine lay 2.5 inches (2" compacted) of surface fine asphalt to driveway.
Compact with a vibratory roller.
Hand tamp edges on a 45-degree angle for a neat appearance.
New Construction
A Finer Surface, LLC, will describe how an individual driveway will be resurfaced and provide a guarantee of work. Grade and compact soil.
Furnish and install CR6 compaction gravel, as needed.
Machine lay 3 inches (2.5" compacted) of base asphalt to the area.
Compact.
Machine lay 2.5 inches (2" compacted) of surface fine asphalt to driveway.
Compact with a vibratory roller.
Hand tamp edges on a 45-degree angle for a neat appearance.
New Areas
Dig out area to be paved.
Haul debris from site.
Grade and compact soil.
Furnish and install CR6 compaction gravel, as needed.
Apply a primer binder to vertical edge of existing driveway.
Machine lay 3 inches (2.5" compacted) of base asphalt to the new area.
Compact.
Machine lay 2.5 inches (2" compacted) of surface fine asphalt to driveway.
Compact with a vibratory roller.
Hand tamp edges on a 45-degree angle for a neat appearance.